Tech Instrumentation Panel & Wall Mounted Meters

TRH122M
Features a Min/Max memory feature, Daily update and is degrees F/C switchable. Can be used as a desktop meter or wall mount. Range is 14 to 122 F (-10 to 50 C) and 25 to 99% RH. Temperature accuracy is +/- 2 degrees F from 32 to 104 and +/- 4 degrees elsewhere. Humidity accuracy is +/-5% from 40 to 80% and +/- 7% over the remainder of the range. 4" x 2.5" x 3/4". AAA battery included.
Price: $58.00

Quantity:

WS9410

Displays Temperature & Humidity with Bar Graph

Features:

Humidity (%RH)
Temperature (°F)
Wall Hanging or Free Standing
MIN/MAX record for temp & humidity with humidity level bar display

Specifications:

Humidity Range : 1% to 99%
Temperature Range :14.2°F to 122.0°F
Power Requirements:
2 "AAA" Alkaline Batteries (not included)
Typical accuracy is +/- 2 °F, +/- 5% RH

Dimensions: 6.0" x 5.5" x 0.7"
Price: $24.00

Quantity:

PM120
Compact Electronic Panel Thermometer, 2.6" x 1.4" x 1" deep, -40/120F, 39" sensor lead, 1/2" LCD Digits, 1/10 of a degree resolution, 2 degree accuracy. Cutout size 2.375" x 0.781". Includes AA Alkaline battery. See model 9302 mounting flange.

Price: $24.00

Quantity:

2225-02
Stem Test Thermometer, 4" x 0.25" Stem, 2.5" Dial, 3" Back Flange. Stainless steel construction with glass lens. 0/220 F. MADE IN USA
Price: $17.00

Quantity:

2225-03
Stem Test Thermometer, 4" x 0.25" Stem, 2.5" Dial, 3" Back Flange. Stainless steel construction with glass lens. -40/160 F
Price: $17.00

Quantity:

2225-05
Stem Test Thermometer, 4" x 0.25" Stem, 2.5" Dial, 3" Back Flange. 200/1000 F Stainless steel construction with glass lens.
Price: $18.00

Quantity:

2245-02
Stem Test Thermometer, 6" x 0.25" Stem, 2.5" Dial, 3" Back Flange. 0/220 F Stainless Steel Construction with Glass Lens.
Price: $18.00

Quantity:

2245-03
Stem Test Thermometer, 6" x 0.25" Stem, 2.5" Dial, 3" Back Flange. -40/160 F. Stainless Steel Construction with Glass Lens
Price: $18.00

Quantity:

2255-02
Stem Test Thermometer, 9" x 0.25" Stem, 2.5" Dial, 3" Back Flange. 0/220 F. Stainless Steel Construction with Glass Lens.

Price: $20.00

Quantity:

2255-03
Stem Test Thermometer, 9" x 0.25" Stem, 2.5" Dial, 3" Back Flange. -40/160 F. Stainless Steel Construction with Glass Lens.
Price: $20.00

Quantity:

253-01
5" x 1.5" Wall Thermometer, Glass Tube. -40/120 F/C - CLOSEOUT PRICE - ONLY 6 REMAIN

Price: $3.50

Quantity:

DPM560FF & DPM560BF
2” Digital Solar Thermometers

Model DPM560BF
Stainless Steel Back Flange Type, Flush Mount
Model DPM560FF
Stainless Steel Front Flange Type, Recessed Mount
Both Models
Battery Back-up, °F/°C Switch
Temperature Range: -58° to 302°F (-50° to 150°C)
Cord Length: 36”, Dimensions (Ø x D): 2-1/4” x 1”

Price: $36.95

Select FlangeType

Quantity:

PM200A-01
The PM200A-01 requires a 12VDC Power supply. It has a range of -40/300F and features 1/10 degree F resolution and 0.3 degree or 0.5% of reading accuracy. Use with Cooper 10K thermistor probes that can be located up to 1000 ft. from the meter. No special extension wire is required for probe extension. Includes a dual set point high/low internal alarm that provides an audible and visual indication of an alarm condition. Alarm setpoints are maintained even after a power loss and can be disabled if desired.

Price: $259.00

Quantity:

PM200A-76
The PM200A-76 requires a 115VAC Power Supply. It has a range of -40/300F and features 1/10 degree F resolution and 0.3 degree or 0.5% of reading accuracy. Use with Cooper 10K thermistor probes that can be located up to 1000 ft. from the meter. No special extension wire is required for probe extension. Includes a dual set point high/low internal alarm that provides an audible and visual indication of an alarm condition plus an external relay output. Alarm setpoints are maintained even after a power loss and can be disabled if desired. Note that this can not be used as a controller since the alarms must be manually reset via pressing any keypad button.
Price: $319.00

Quantity: