LogTag TRED30-16R Remote Probe Temperature Recorder (probe optional)

  • $115.50 USD
Shipping calculated at checkout.

Only 166 left!

IMPORTANT: Each location (not each logger) requires a LogTag Cradle in order to program and retrieve data from the logger.  CRADLE IS HERE.
  • Interchangeable External Probe (Optional, Not Included)
  • Display shows current time & temperature plus alarm status
  • 30 day statistics summary on display
  • User-replaceable battery

The TRED30-16R Temperature Recorder uses an External Probe (NOT INCLUDED) to measure and store up to 7770 temperature readings over a measurement range of -40°C to +99°C (-40°F to +210°F). The display of current temperature and previous alarms is an important feature in applications such as cool rooms and refrigerators. The display elements are arranged so they to show ‘at a glance’ if temperature violations have occurred between now and 29 days ago.

Kits:

https://www.techinstrument.com/products/copy-of-vaccine-temperature-data-logging-kit-logtag-tred30-16r-lt-vaccine-kit1

https://www.techinstrument.com/products/vaccine-vfc-temperature-data-logging-kit-logtag

https://www.techinstrument.com/products/logtag-vaccine-storage-kit?variant=29774071169

 

Display:

The normal recording display shows the current temperature reading, the time and the alarm trigger day summary. A visual alarm trigger is displayed if one or more of the configured alarm trigger conditions have been met. An alarm trigger condition can be a single reading above the upper or below the lower threshold values, a set of consecutive violating readings or an accumulation of violation readings encountered.

  • Replaceable battery CR2032
  • Temperature range with ST100: -40°C ~ +99°C
  • Operating range: -30°C ~ +60°C
  • Temperature Accuracy:
  • Better than ±0.5°C for -20°C~+40°C - typically ±0.3°C
  • Better than ±0.8°C for -40°C~+20°C - typically ±0.5°C
  • Better than ±0.8°C for +40°C~+70°C - typically ±0.7°C
  • Better than ±1.2°C for +70°C~+99°C - typically ±1°C
  • Battery Life: Typically 1 year
  • Complies with EC EMC directives (EN 61000-6-3:2006 & EN 61000-6-1:2005)
  • Complies with FCC Part 15 Subparts A and B.
Environmental:
  • IP65 (when vertically mounted or hung)
  • FDA 21CFR Part 11 Compliance
  • Designed to comply with FDA 21CFR Part 11 (Digital signatures)

Recording capacity:

  • Data logging memory : 7770 logs - eg 53 days @ 10min logging, 80 days @ 15min logging
  • Sampling Interval: configurable from 30 seconds to hourly
  • Logging Modes: Supports ‘continuous’ wrap around or specific recording period
  • Clock Accuracy: 2.5 seconds/day
  • Download time: 5 seconds
  • LogTag® TRED30-16R is designed and calibrated for use with the LogTag® ST100 remote temperature probe series. Only this probe is compatible with TRED30-16R and using any other probe type is likely to cause an error in readings.
  • LogTag® ST100 sensors are designed and calibrated for interchangeability with TRED30-16R loggers to the standard rated accuracy of the product. If a TRED30-16R /ST100 probe combination is calibrated to a higher level of accuracy (as is possible) then care should be taken to always use the same TRED30-16R/ST100 combination for measurements as the ST100 sensor is not rated interchangeable at accuracies better than the TRED30-16R/ST100 rating in this specification.
ST100 Probes
  • The ST100 probes are distinguished from other LogTag® remote temperature probe types by the blue sleeve blue body at the plug end of the probe cable. Stainless probe Ø 3.2mm, short
  • ST100S-15 (1,5m), ST100S-30 (3,0m):  The short tipped probe incorporates a 22mm exposed length of 5mm OD 316 stainless probe without handle.  Materials at probe end of cable are FDA food rated including the cable.
  • ST100J-15 (1.5m), ST100J-30 (3.0m)
  • Short tipped probe. ~40mm of exposed length of 3.2mm diameter 316 stainless probe. Materials at probe end of cable are FDA food rated including the cable.
  • ST100T-15 (1,5m), ST100T-30 (3,0m):  Stainless probe Ø 5mm. 140mm exposed length of 5mm OD 316 stainless probe. Materials at probe end of cable are FDA food rated including the cable.  PROBE IS HERE.
  • ST100K-15 ~ 1.5m (4'11”) ~ 65mm of exposed length of 3.2mm OD 316 stainless probe.  All materials of cable are FDA food rated including the cable.  PROBE IS HERE.
  • ST100K-30 ~ 3m (9'10") ~ 65mm of exposed length of 3.2mm OD 316 stainless probe.  All materials of cable are FDA food rated including the cable. PROBE IS HERE.
  • ST100H-15 (1,5m), ST100H-30 (3,0m):  Handled probe: 70mm long shaped handle with a 105mm length 5mm OD 316 stainless probe. All materials at probe end are FDA food rated including the cable. Stainless probe Ø 3.2mm, long.  PROBE IS HERE.
  • ST100L-15 (1.5m), ST100L-30 (3.0m): Supplied standard (part# ST100L-15) with 1.5m (4'11”) or extended (part#ST100L-30) with 3m (9'10").  PROBE IS HERE.
  • Bare Probe: ST100B-15 (1,5m), ST100B-30 (3,0m) Not rated for food contact or environmentally rated.  PROBE IS HERE.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00 USD
Shipping
Total

Shipping address

★ Judge.me Reviews

Let customers speak for us

838 reviews
87%
(731)
5%
(45)
4%
(30)
1%
(9)
3%
(23)

I hope it last as long as the first one (10 years)

Easy to find

Your site is easy to use Even for an old person. Thanks

Great delivery and good deal

Job complete

Disappointed

1 - It took way too long to receive order, recommend you use another shipper.
2 - I was told ordered item would soon no longer be produced.
3 - If I need additional weather gear in the future, I will look for another provider.

We're sorry your package was delayed. Unfortunately this is more common than it used to be but once shipped, we're all at the mercy of the carrier.