Supco EM90 Infrared and Thermocouple Thermometer with Probe, -50 to 300 Degrees C, -58 to 572 Degrees F, Accuracy of + or - 1.5% of Reading Plus 2 Degrees C
- Digital thermometer with probe for measuring temperature in heating, ventilation, and air-conditioning applications, including refrigeration and heating systems, supply and return registers, circuit breaker panels, motors and bearings, transformers, and ducts
- infrared sensor measures temperature from -50 to 300 degrees C (-58 to 572 degrees F), with a best accuracy of + or - 1.5% of reading plus 2 degrees C (4 degrees F)
- Infrared sensor measures temperature from a distance
- K-type thermocouple sensor, for a broader temperature measurement range than a thermistor sensor
- 2:1 distance-to-spot ratio
The Supco EM90 infrared thermometer with K-type thermocouple wire probe is for measuring temperature in heating, ventilation, and air-conditioning applications, including refrigeration and heating systems, supply and return registers, circuit breaker panels, motors and bearings, transformers, and ducts. The infrared sensor measures temperature from -50 to 300 degrees C (-58 to 572 degrees F), with a best accuracy of + or - 1.5% of reading plus 2 degrees C (4 degrees F). The infrared sensor measures temperature from a distance for applications involving hard-to-reach, moving, hot, or electrified equipment. The detachable K-type thermocouple wire probe takes contact surface temperature measurements and provides a broader temperature measurement range but lower accuracy than a thermistor sensor. The infrared sensor has a 2:1 distance-to-spot ratio, which means the measurement field measures approximately 2 feet in diameter when the target is 1 foot away. A built-in laser pointer helps improve aiming accuracy when taking infrared measurements. The LCD screen can display the current temperature, the highest or lowest temperature reading for the session, and the average temperature for the session. The operator can choose to display readings in degrees Fahrenheit or Celsius. The hold function keeps a measurement on the display so it can be recorded. The display is backlit for readability in low light. The thermometer operates on two AAA batteries (included), and it can be set to automatically shut off after 25 seconds or 20 minutes of non-use to conserve battery life. A lanyard is included to help protect against accidental drops, and a sensor cover helps protect the inputs from debris.
|Infrared thermometer temperature measurement range||-50 to 300 degrees C (-58 to 572 degrees F)|
|Infrared thermometer accuracy||+ or - 5% of reading at -50 to -20 degrees C (-58 to -4 degrees F); + or - 1.5% of reading plus 2 degrees C (4 degrees F) at -20 to 300 degrees C (-4 to 572 degrees F)|
|K-type thermocouple temperature measurement range||-200 to 1300 degrees C (-328 to 2372 degrees F)|
|K-type thermocouple accuracy||+ or - 0.2% of reading plus 1 degree C (2 degrees F) at -200 to -100 degrees C (-328 to -148 degrees F); + or - 0.1% of reading plus 0.7 degree C (1.4 degrees F) at -100 to -1300 degrees C (148 to 2372 degrees F)|
|Resolution||0.1 degree C or F|
|Response time||0.5 second|
|Operating temperature||0 to 50 degrees C (32 to 122 degrees F)|
|Power supply||AAA batteries (two, included)|
|Weight||180 g (6.35 oz.)|
|Dimensions*||121 x 60 x 30 mm/4.76 x 2.36 x 1.18 (H x W x D)|
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricity, which is measured and converted to a temperature reading. The reading is then displayed on an LCD display. IR thermometers are used to measure temperature when an object is fragile, as in ear thermometers, or dangerous to be near, as in the case of industrial equipment.
Supco manufactures test instruments and replacement parts for heating, ventilation, air conditioning, and refrigeration systems. The company, founded in 1945, is headquartered in Allenwood, NJ.
What's in the Box?
- Supco EM90 infrared and thermocouple thermometer
- K-type thermocouple wire probe
- (2) AAA batteries
Package Dimensions: 9.1 x 8.5 x 1.9 inches
Net Orders Checkout
Let customers speak for us209 reviews
Shipment arrived on time and as ordered.
The La Crosse V10-TH Wireless Weather Station (Model No. C84343) is absolutely wonderful. The setup was easy with the Quick Setup Guide provided with the unit. The packaging contains additional support information with the website and phone number if there are questions. I especially liked the daily high low readings and the color on the unit! Tech Instrumentation provided great communication as to the availability of the product and shipping details. If fact, it arrived one day prior to the estimated delivery date. I would absolutely recommend this product and Tech Instrumentation for anyone looking for an indoor/outdoor weather station!
I needed a replacement as my original sensor no longer worked. This one works fine.
I can't way enough about the customer service at Tech Instrumentation. I was looking for a hard to find specialty part, which the manufacturer told me would need to be custom made. After calling and speaking with a representative at Tech Instrumentation, the part was located and order was filled, right over the phone. Delivery was prompt, and instrument is working great. Highly recommended company for lab supplies!
Put batteries in and worked great