4380CC Radio Signal Remote Thermometer and Hygrometer - Tech Instrumentation

4380CC Radio Signal Remote Thermometer and Hygrometer

  • $91.55 USD
Shipping calculated at checkout.

Only 7 left!

Monitors humidity and temperature up to 100 feet away

  • Unit feature high/low alarms, °F/°C switchable
  • Data is transmitted every 30 seconds
  • Trend indicators show if humidity is rising or falling
  • Additional Humidity/Thermometer Remote Sensor Module may be set to channel 1, 2, or 3; total of three modules may be used with main unit.
  • Temperature and Humidity Alarms

 

DISPLAYS HUMIDITY AND TEMPERATURE FROM 100 FEET AWAY

Radio-Signal Remote Humidity Meter/Thermometer receives a radio signal from the remote wireless sensors. It eliminates the cable. Place the main unit at your desk or bench. Place the remote sensor module in labs, ducts, and storage facilities—even outdoors. Remote sensor sends humidity and temperature signals to the main digital display. Transmits on a frequency of 433 MHz. Range is 65 to 100 feet, depending on the location or number of walls. Multiple main units must be more than 400 feet apart.


MAIN UNIT

Relative humidity range is 25 to 90% with a resolution of 1% and an accuracy of ±2% RH mid-range to ±4% RH elsewhere. Switchable thermometer range is –4 to 140°F and –20 to 60°C, with a resolution of 0.1° and an accuracy of ±1°C.


REMOTE SENSOR (INCLUDED)

Relative humidity range is 25 to 90% with a resolution of 1% and an accuracy of ± 5% midrange, ± 7% otherwise RH elsewhere. Switchable thermometer range is –4 to 140°F and –20 to 60°C, with a resolution of 0.1° and an accuracy of ±1°C.


DISPLAYS UP TO THREE MODULES

Main unit can receive and display data from up to three different remote sensor modules. Minimum and maximum memory display allows monitoring of conditions over short or long periods, including overnight or weekends. An alarm may be set in increments of 1% RH and 1°. The alarm sounds when the humidity or temperature exceeds the high and low set points for channel 1 only. Jumbo digits (1-3/8-inches-high) may be read from 25 feet. Cases are high-impact, chemical-resistant ABS plastic. Furnished with a flip-open stand, wall brackets, and Velcro™ to attach to any surface. Batteries operate continuously for eight months.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00 USD
Shipping
Total

Shipping address

★ Judge.me Reviews

Let customers speak for us

321 reviews
86%
(277)
7%
(21)
3%
(9)
2%
(7)
2%
(7)
Wireless temp sensor replacement

Great sensor, easy to install and connect with my weather station (less than a minute)

Great Service

Ordered and delivered on time

Poor Quality

Gave 2 stars for fast shipping. Poor quality. Stabbed around 10 bales and it’s already bent. My bales are tight, which they should be. Why would you make a probe with a blunt end and not pointed? This probe is so difficult to get into my bales and due to this, the head is already bent.

I really like the product.

Good features, needs gentle handling

I'm buying a replacement because I use it in my truck and it works well. Because there's no metal to attach the magnet to, I lay it in the little coin compartment above my left knee. I pick it up to read it, so the wire gets flexed a lot where it enters the housing. The insulation wore off and the wire shorted out, so I get a reading of HH.H for the outside temps. I'll probably reinforce the wire on the new one with tape or silicone caulk.

en English
zh-cn Chinese (Simplified)zh-tw Chinese (Traditional)da Danishnl Dutchen Englishfi Finnishen Frenchde Germanga Irishit Italianja Japaneseko Koreanla Latinno Norwegianpl Polishru Russiangd Scottish Gaelices Spanishsv Swedishth Thai