bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V - 240V 15A
- Manual has been updated for easier comprehension. This controller uses independent heating and cooling toggling points to keep your environment in the ideal temperature range
- Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device
- Waterproof sensor, high/low temperature alarm, and automatic power-on delay to protect compressors
- MAX LOAD: 1650W at 110V or 3300W at 220V. (Celsius or Fahrenheit Read-out)
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc
Details: The BTC211 (BTC200 Series) bayite temperature controller can turn on/off an electric appliances at desired temperature.
And the operation of this digital thermostat outlet has been simplified for ease of use.
For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). Please note that the controller itself doesn't change temp.
Plug and play. No worry about wiring.
Maximum load: 1650W @110V or 3300W @220V(Not compatible with the 2 hot line 220V)
On/Off Control, Heating and Cooling
Celsius or fahrenheit read-out.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
1.Power supply: AC 110V ~ 240V, 50/60Hz
2.Measure range: -58°F ~ 230°F / -50°C ~ 110°C
3.Temperature resolution: 0.1
5.Working mode: Heating and Cooling mode
6.Max span between turn-on degree and turn-off degree is 25
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 15A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9x4.5x1.9 inch (12.5x11.5x5 cm)
14.Sensor Cable length: 3m(9.8ft)
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
1x BTC211 Temperature controller
1x sensor cable
1x power cord (0.97m/3.2ft)