DT400 Waterproof Thermometer with Quick Responding Tip - Tech Instrumentation

DT400 Waterproof Thermometer with Quick Responding Tip

  • $23.69 USD
Shipping calculated at checkout.

Only 72 left!

The DT400 Pocket Thermometer with Thin Tip Probe has a large digit display visible from the top of the instrument.  This thermometer is NSF Approved.  Waterproof enough to use it to check the final rinse temperature of dishwashers.

  • Temperature Range: -20°C to +200°C / -4°F to +400°F
  • Thin Tip Probe: 1.5mm
  • Accurate to ±0.5°C / ±1°F
  • Recalibratable

The DT400 Pocket Thermometer with Thin Tip Probe has a large digit display visible from the top of the instrument. By using the maximum hold button, you can switch between the maximum reading and the current temperature reading.

The DT400 Pocket Thermometer can be used for food temperature checks and the thin tip probe gives a response within 6 seconds.

It is a waterproof thermometer and durable enough to use for checking the final rinse cycle temperature of commercial dishwashers.


Operating Instructions

Press the on/off button to start or stop operation of the DT400. The unit will automatically power off after 35 minutes to save battery life. Press the ‘°F/°C’ button to select Fahrenheit or Celsius scale.

MAX Temperature: Press the ‘MAX’ button to display the maximum temperature recorded. To remove the MAX reading from the memory, press the MAX button and the ‘on/off’ button at the same time for 2 seconds to return the unit to current temperature display.

Data Hold: To hold a displayed reading, press the ‘D-H’ button. ‘D-H’ will show in the top right hand corner of the screen while data hold is in operation. Press the button again to return to normal operation.

Battery Removal: Use a screwdriver blade or coin to turn the battery cover counter clockwise for removal. Replace the (AB13) (1.5V LR44)  battery and turn the cover clockwise until tight.


Field Calibration Procedures

1. The DT400 is only calibratable in a slush ice solution (60% crushed ice and 40% tapped water) or a water bath. Do not attempt to calibrate in any other manner.

2. Immerse the stem of the thermometer to at least half the length in the slush ice solution.

3. Wait for the reading to become stable (usually ±2° of +32°F or ±1° of 0°C).

4. Press and hold the ‘D-H’ button for 8 seconds to begin calibration.

5. ‘CAL’ will be displayed for seconds and calibration at 0°C / +32°F is completed.

6. Remove the thermometer from the ice water and continue to take measurements.

NOTE: ‘CAL’ will be displayed any time the ‘D-H’ key is pressed for 7 seconds, but the thermometer will not be re-calibrated unless the tip is inserted in ice.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00 USD
Shipping
Total

Shipping address

★ Judge.me Reviews

Let customers speak for us

292 reviews
87%
(253)
7%
(19)
3%
(8)
2%
(6)
2%
(6)
Temperature Sensor

The EXACT one we needed. Thanks for quick shipment of the Sensor. Works great! Five Star Service and I will be using you in the future!

Perfec

The thermometer is small and perfect for the place I wanted to put it

Pizza oven Thermometer

Very happy with the 2 pizza oven thermometers that we got, the delivery time was good. The only issue we had was the overseas shipping price that was quoted was way over the top, we ended up finding another way to do it that was over $100 cheaper

Panel Thermometer

Great price and was just what was needed.

en English
zh-cn Chinese (Simplified)zh-tw Chinese (Traditional)da Danishnl Dutchen Englishfi Finnishen Frenchde Germanga Irishit Italianja Japaneseko Koreanla Latinno Norwegianpl Polishru Russiangd Scottish Gaelices Spanishsv Swedishth Thai