KM14

  • $11.16 USD
Shipping calculated at checkout.

Only 22 left!

The Comark KM14 Commercial Dishwasher Thermometer incorporates a stainless steel penetration probe and can be placed inside a commercial dishwasher to check cycle temperatures.

  • Temperature Range: -4°F to +400°F / -20°C to +200°C
  • Stem Length: 127mm / 5″
  • Accurate to ±1°C / ±2°F
NSF_logo

The KM14 Dishwasher Thermometer incorporates a stainless steel penetration probe and can be placed inside a commercial dishwasher to check cycle temperatures are correct by using the maximum hold feature. A quick reading will show whether dishwasher operated at the correct temperature to sanitize equipment.

The Comark KM14 Commercial Dishwasher Thermometer is multi-purpose and can also be used as a conventional food penetration probe thermometer. The KM14 Dishwasher Thermometer is a top performing digital thermometer that combines accuracy, speed of response and durability. Incorporates extended temperature range and max/min hold feature.

This Pocket Digital Thermometer combines accuracy with speed and durability. It was designed for use in commercial dishwashers*, so it is completely waterproof and has a ‘Max Hold’ feature that allows you to verify the highest temperature record during the dishwasher cycle.

  • Waterproof and dishwasher safe
  • Field calibratable
  • Auto power off
  • Data hold button
  • BioCote Antimicrobial Protection
  • NSF Certified
Temperature Measurement Range -20°C to +200°C / -4°F to +400°F
Accuracy ±1°C / 2°F
Resolution 0.1°C/F
Stem Length 127mm / 5"
Probe Tip Diameter 2.2mm
Sample Time 1.5 seconds
Environmental Protection BioCote Antimicrobial Protection
Certification NSF Listed
Battery Type 1.5 V Button Cell battery (Part no. AB13; LR44)
Waterproof Yes, to 3 ft of water for 30 minutes
Warranty 1 Year Limited

 

KM14 Calibration Procedure

The KM14 Dishwasher Thermometer can be calibrated at any time and the procedure is quick and simple:

  • Put some water and crushed ice into a clean mug or water bath (approx 60% crushed ice to 40% water), or see our thermally insulated Valcup which marks the proper mixture for you.
  • Insert the thermometer into the ice solution until the stem is covered to at least half way along its length.
  • Wait for the reading to settle.
  • Press and hold the D-H button for 8 seconds to begin calibration.
  • “CAL” will be displayed on the LCD screen and calibration at 0°C (32°F)  will be complete.

 

QUESTIONS & ANSWERS

Ask a Question
  • How do I set my km14 to max hold to check temp. On my dishwasher

    After running through the dishwasher cycle,  remove the KM14 from the dishwasher and press the ((MAX)) button for 2 seconds and the highest temperature will be displayed.  Press it again for 2 more seconds to return to the normal reading.  To clear the current MAX reading, while the MAX temperature is showing, press the ((MAX)) and the ((ON/OFF)) buttons at the same time until the display shows "----".  Please note that if you do not clear the MAX memory, that future runs through the dishwasher may be incorrect as they may show the previous MAX reading.

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Tracy Barker
Help Me get an Item receipt with price

Item came in and works great...Need a receipt with prices...please tbarker@sau66.org

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00 USD
Shipping
Total

Shipping address