TL1A Precision Thermometer

$565.09 USD

Shipping calculated at checkout.

TL1-A
Key Features
Specifications

(Please note - Thermoprobe products are built to the order and usually require 12 to 14 business days to ship)

The ThermoProbe TL1-A intrinsically safe thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used.

Please note that additional lengths are available. Please call for price and lead times.

This precision thermometer is an improved version of the original ThermoProbe model TL1. The TL1-A cordless thermometer incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the ThermoProbe TL1-A has accuracy, repeat-ability and long-term stability. But unlike those precision thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most electronic thermometers, the "Cordless" TL1-A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration, or battery removal. This cordless thermometer features a low battery display, and failure mode indications protect the user from false data. For a modified field version, check out the ThermoProbe TL1W.

4 Point NIST Traceable Calibration and a one year warranty included.

Auto-off after 20 minutes to save battery life
Minimum reading
Maximum reading
Averaging
Easy °F to °C switching
Display arrows indicate increasing or decreasing temperature activity

Due to the special calibration on these meters, please allow approximately 7 to 10 days to ship. Includes certificate of calibration at the following approximate points: 32, 120, 199 (200) and 300 degrees F. We can also certify at 115 degrees F for an extra charge (See Options)

Display:	LCD with 0.25 inch characters Trend Indicating Arrows Low Battery & Fault indication
User Functions:	Auto Off after 20 minutes or continuous operation Lowest Reading, Highest Reading, Average Reading Switchable in Units of °F or °C Display tenths or hundredths resolution
Construction:	Stainless Steel temperature sensor; Standard Sensor length 8" (20cm) Standard diameter 1/4" (6.35mm) with reduced diameter tip of 3/16" (4.76mm) Sensor mount acetyl plastic Electronics and display in 3.5" x 1.2" anodized Aluminum enclosure Molded Silicone seal. Highly durable display window, graphics and membrane switches.
Weight:	3 ounces, 93 grams
Temperature:	Resolution 0.01 Degrees Calibrated Accuracy: ±0.1 °F from 14 to 320 °F ±0.06 °C from -10 to 160 °C NIST Traceable Report of Test
Temperature Time Constant:	8 seconds in circulated water bath (63.2% response to temperature change)
Electronics:	Microcontroller and precision 20 bit A/D Converter FLASH memory Recommended Temperature Range For best Accuracy 32 to 112 °F, 0 to 44 °C 100 Ohm, Class A Platinum RTD Immersion depth 4", 11cm
Sensor:	100 Ohm, Class A 1/3 DIN RTD Immersion depth 4", 11cm
Battery:	20mm Coin Size 3V Lithium, Duracell Type CR2032 Over 100 hours Service Life at 70 °F, 21 °C Battery Operating Range -4 to 130 °F, -20 to 54 °C Note: Battery may not provide adequate power if ambient temperature is below -4 °F, -20 °C or above 130 °F, 54 °C

Specifications subject to change

Typical Applications

Temperature baths, melting point tests, flash point tests, reference, thermowells, provers, temperature calibration for flow meters.
Industries:	Laboratory Petroleum Pipeline Pharmaceutical Food

Item

Price

Qty

Total

Subtotal

$0.00 USD

Shipping

Total

Easy ordering

Easy ordering, And very prompt service. We ordered the same units in the past and have used him extensively. We are very happy with the high-quality

Great Bread Thermometer

I love the big dial which makes it easy to read, unlike the ones they sell in the stores, which have small dials. I could not find a thermometer made just for yeast and dough. I am glad that I came across your website.

V21-WTH

This gift was well received, especially since the recipient picked it out. Got it up and running in time for the good storm (very windy today). We live on the northern coast of California and usually have at least 7 mph winds on a slow day. Today we are having 20-30 mph winds, love the new weather station!!

Help Me get an Item receipt with price

Item came in and works great...Need a receipt with prices...please [email protected]

Works Great! Though it is not mentioned in the specs., it also works with the Weather Channel version of the La Crosse Weather Station model number WS-9047U-IT.

TL1A Precision Thermometer

Customer Reviews

Let customers speak for us

TL1A Precision Thermometer

Customer Reviews

Net Orders Checkout

Shipping address

Let customers speak for us