TL1A Precision Thermometer - Tech Instrumentation

TL1A Precision Thermometer

  • $537.38 USD
Shipping calculated at checkout.

Only -6 left!

(Please note - Thermoprobe products are built to the order and usually require 12 to 14 business days to ship)

The ThermoProbe TL1-A intrinsically safe thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used.

Please note that additional lengths are available.  Please call for price and lead times.

This precision thermometer is an improved version of the original ThermoProbe model TL1. The TL1-A cordless thermometer incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the ThermoProbe TL1-A has accuracy, repeat-ability and long-term stability. But unlike those precision thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most electronic thermometers, the "Cordless" TL1-A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration, or battery removal. This cordless thermometer features a low battery display, and failure mode indications protect the user from false data.

4 Point NIST Traceable Calibration and a one year warranty included.

    • Auto-off after 20 minutes to save battery life
    • Minimum reading
    • Maximum reading
    • Averaging
    • Easy °F to °C switching
    • Display arrows indicate increasing or decreasing temperature activity

      Due to the special calibration on these meters, please allow approximately 7 to 10 days to ship. Includes certificate of calibration at the following approximate points: 32, 120, 199 (200) and 300 degrees F. We can also certify at 115 degrees F for an extra charge (See Options)

      Display:

      LCD with 0.25 inch characters
      Trend Indicating Arrows
      Low Battery & Fault indication

      User Functions:

      Auto Off after 20 minutes or continuous operation
      Lowest Reading, Highest Reading, Average Reading
      Switchable in Units of °F or °C
      Display tenths or hundredths resolution

      Construction:

      Stainless Steel temperature sensor; Standard Sensor length 8" (20cm)
      Standard diameter 1/4" (6.35mm) with reduced diameter tip of 3/16" (4.76mm)
      Sensor mount acetyl plastic
      Electronics and display in 3.5" x 1.2" anodized Aluminum enclosure
      Molded Silicone seal.
      Highly durable display window, graphics and membrane switches.

      Weight:

      3 ounces, 93 grams

      Temperature:

      Resolution 0.01 Degrees
      Calibrated Accuracy:
      ±0.1 °F from 14 to 320 °F
      ±0.06 °C from -10 to 160 °C
      NIST Traceable Report of Test

      Temperature Time Constant:

      8 seconds in circulated water bath
      (63.2% response to temperature change)

      Electronics:

      Microcontroller and precision 20 bit A/D Converter
      FLASH memory
      Recommended Temperature Range For best Accuracy 32 to 112 °F, 0 to 44 °C
      100 Ohm, Class A Platinum RTD
      Immersion depth 4", 11cm

      Sensor:

      100 Ohm, Class A 1/3 DIN RTD
      Immersion depth 4", 11cm

      Battery:

      20mm Coin Size 3V Lithium, Duracell Type CR2032
      Over 100 hours Service Life at 70 °F, 21 °C
      Battery Operating Range -4 to 130 °F, -20 to 54 °C
      Note: Battery may not provide adequate power if ambient temperature is below -4 °F, -20 °C or above 130 °F, 54 °C

      Specifications subject to change

       

      Typical Applications

      Temperature baths, melting point tests, flash point tests, reference, thermowells, provers, temperature calibration for flow meters.

      Industries:

      Laboratory
      Petroleum
      Pipeline
      Pharmaceutical
      Food



      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      Net Orders Checkout

      Item Price Qty Total
      Subtotal $0.00 USD
      Shipping
      Total

      Shipping address

      ★ Judge.me Reviews

      Let customers speak for us

      321 reviews
      86%
      (277)
      7%
      (21)
      3%
      (9)
      2%
      (7)
      2%
      (7)
      Wireless temp sensor replacement

      Great sensor, easy to install and connect with my weather station (less than a minute)

      Great Service

      Ordered and delivered on time

      Poor Quality

      Gave 2 stars for fast shipping. Poor quality. Stabbed around 10 bales and it’s already bent. My bales are tight, which they should be. Why would you make a probe with a blunt end and not pointed? This probe is so difficult to get into my bales and due to this, the head is already bent.

      I really like the product.

      Good features, needs gentle handling

      I'm buying a replacement because I use it in my truck and it works well. Because there's no metal to attach the magnet to, I lay it in the little coin compartment above my left knee. I pick it up to read it, so the wire gets flexed a lot where it enters the housing. The insulation wore off and the wire shorted out, so I get a reading of HH.H for the outside temps. I'll probably reinforce the wire on the new one with tape or silicone caulk.

      en English
      zh-cn Chinese (Simplified)zh-tw Chinese (Traditional)da Danishnl Dutchen Englishfi Finnishen Frenchde Germanga Irishit Italianja Japaneseko Koreanla Latinno Norwegianpl Polishru Russiangd Scottish Gaelices Spanishsv Swedishth Thai