La Crosse TX141TH-BCHV3 Multi-Channel Add-On Temperature and Humidity Sensor
BACK IN STOCK!
PLEASE NOTE: If you are not 100% SURE this sensor is compatible with your base unit, please contact us to confirm you are ordering the correct one. YOU CANNOT GO BY MHZ. Also, if you are replacing a sensor, THE MODEL NUMBERS MUST MATCH EXACTLY!
PLEASE NOTE: Due to our contracts with manufacturers, we are unable to sell this item to resellers. If you are a reseller and you place an order on eBay, your order will be refunded in full and you will be blocked without notice.
- Indoor or Outdoor Temperature and Humidity Sensor
- Weather Resistant
- Temperature range: -40°F to 140°F (-40°C to 60°C)
- Transmission range: Up to 300 feet
- Transmission frequency: 433 MHz
- 2 "AA" Alkaline batteries (not included)
- 1.57" L x 0.79" W x 5.12" H
Consider protecting your sensor with the Sensor Weather Shield by la Crosse, that can be found here: https://techinstrument.com/products/sensor-weather-shield-by-la-crosse
PLEASE NOTE: All non-defective returns will incur a 20% restocking fee.
QUESTIONS & ANSWERSAsk a Question
My sensor is TX141THBV2 I need replacement
Hello. The TX141TH-BV2 has been replaced with the TX141TH-BV3, which can be found here: https://techinstrument.com/products/la-crosse-tx141th-bv3-temperature-and-humidity-sensor
Please note that the sensor you messaged us from IS NOT the correct replacement.
How to tell if remote is still funcing. TX141TH-B. Thanks. John
Hello. If your TX141TH-B is reporting the outside temperature to your weather station, it is working. Just a note that you asked this question from a sensor that IS NOT a replacement for the TX141TH-B. If you need a replacement for the TX141TH-B, it is the TX141TH-BV3, which can be found here: https://techinstrument.com/products/la-crosse-tx141th-bv3-temperature-and-humidity-sensor?_pos=1&_sid=d0248edaf&_ss=r
My sensor is tx141th-b do you hav a replacent John faust
Hello. The replacement for the TX141TH-B sensor is the TX141TH-BV3, which can be found here: https://techinstrument.com/products/la-crosse-tx141th-bv3-temperature-and-humidity-sensor?_pos=1&_sid=d0248edaf&_ss=r
My sensor is marked TX141TH-BCH will my station work with your sensor that is marked TX141TH-BCHV3? My station is C87030 and is marked with use sensor TX141TH=BCH Thanks for your help
Hello. Yes, your weather station does, indeed, take the TX141TH-BCHV3, which can be found here: https://techinstrument.com/products/la-crosse-tx141th-bchv3-temperature-and-humidity-sensor?_pos=2&_sid=ee545a3cf&_ss=r . The "V3" just means they are on "Version 3" of the original sensor.
Works fine for now time will tell
The replacement temp/humidity sensor works perfectly. It was so nice to be able to continue using my existing weather station and not replace everything. Thank you.
Great instrument, easy to install, very accurate
works as advertised
[****] Multi-Channel Add-On Temperature and Humidity Sensor
Model is back compatible with older weather lacrosse weather station
This new product is working perfectly I could not be happier.
product met my expectations. It was easy to sync with the host machine.
Works Great, but these units only last a couple or three years and need to be replaced
Sent me the manual and told me which page to pair with the base. THANKS