TCM-3010 Input Module for RTR-505TC - Tech Instrumentation

TCM-3010 Input Module for RTR-505TC

  • $93.60 USD
Shipping calculated at checkout.

Only 6 left!

Note:
Input modules have been gradually phased from the black model to the white model. Both models provide the same measurement performance but differ in size; please see the figures below for the size of each model.
TCM-3010: Thermocouple Module
TCM-3010
Measurement Items Temperature
Compatible Sensors Thermocouple: Type K, J, T, S
Measurement Range -199 to 1700 °C (within the sensor heat-durability range only)
Measurement Resolution Type K, J, T : 0.1 °C
Type S : about 0.2 °C
Measurement
Accuracy (*1)
Cold Junction
Compensation
At -40 to 10 °C: ±0.5 °C
At 10 to 40 °C: ±0.3 °C
At 40 to 80 °C: ±0.5 °C
Thermocouple
Measurement
Type K, J, T : ±0.3 °C + 0.3% of reading
Type S : ±1 °C + 0.3% of reading
Sensor Connection Miniature Thermocouple Connector (*2)
Operating Environment Temperature: -40 to 80 °C , Humidity: 90%RH or less (no condensation)
(*1) Does not include inaccuracies of sensor actually connected.
(*2) Make sure to use a thermocouple sensor with a miniature thermocouple plug attached. T&D does not make available these plugs or sensors for sale.
Materials: (1)Polyamide, (2)Vinyl Coated Electrical Wire

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
D.G.
5/5

TCM-3010 Input Module for RTR-505TC


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00 USD
Shipping
Total

Shipping address

★ Judge.me Reviews

Let customers speak for us

321 reviews
86%
(277)
7%
(21)
3%
(9)
2%
(7)
2%
(7)
Wireless temp sensor replacement

Great sensor, easy to install and connect with my weather station (less than a minute)

Great Service

Ordered and delivered on time

Poor Quality

Gave 2 stars for fast shipping. Poor quality. Stabbed around 10 bales and it’s already bent. My bales are tight, which they should be. Why would you make a probe with a blunt end and not pointed? This probe is so difficult to get into my bales and due to this, the head is already bent.

I really like the product.

Good features, needs gentle handling

I'm buying a replacement because I use it in my truck and it works well. Because there's no metal to attach the magnet to, I lay it in the little coin compartment above my left knee. I pick it up to read it, so the wire gets flexed a lot where it enters the housing. The insulation wore off and the wire shorted out, so I get a reading of HH.H for the outside temps. I'll probably reinforce the wire on the new one with tape or silicone caulk.

en English
zh-cn Chinese (Simplified)zh-tw Chinese (Traditional)da Danishnl Dutchen Englishfi Finnishen Frenchde Germanga Irishit Italianja Japaneseko Koreanla Latinno Norwegianpl Polishru Russiangd Scottish Gaelices Spanishsv Swedishth Thai